Vtb 50 Manifold Bar - GDD VTB 50 Instructions D'installation

4
4

VTB 50 manifold bar

The manifold consists of two chambers arranged one above the
other with thermal separation of flow and return. The heat gener-
ator circuit can be connected on both the left and the right.
All connections are prepared for the use of Victaulic clamps.
The top outflows for connecting the heating circuits have a nom-
inal width of DN 50 (Ø 60.3 mm) with Victaulic groove.
The manifold is varnished, pressure-tested, completely insulated
and comes with two height-adjustable feet.
Article No. Art. designation
367730 VTB 50
E-4
Received volume flow (external diameter)
12 m³/h 114,3
The manifold also comes with two Victaulic couplings and two
end caps with 1/2" hole, as well as insulations for the Victaulic
clamps. The holes are closed with sealing plugs. Alternatively, a
KFE valve can also be mounted for drainage.
The manifold consists of elements for two heating circuits. The
manifold system can be combined and expanded as required.
max. permissible pressure level: PN 10
max. permissible temperature: 110 ?
Ø pipe
Minimum height H
a in mm
in mm
170 580
Axle distance AA
in mm in mm
225