ERRECOM Pure Ozone Machine Manuel D'utilisation page 8

DIRECTIONS TO USE PUREOZONE MACHINE
• Connect PureOzone Machine to electric power with the power cable supplied with the device
• Check that the first led (15") flashes
• Pressing the MODE button we can select the desired duration of the treatment
• The green led corresponding to the selected time should flash
• Select the START/STOP button to start the treatment
• Check that the fan is working to run a correct treatment
• When the treatment is running the led changes from flashing green light to fix green light
• Once the treatment is complete the light changes from fix green to flashing green
• If the temperature inside the cockpit or the interior is above 60 °C PureOzone Machine will automatically stop and
the red HIGH TEMPERATURE led will switch on
• When the temperature will return below 60 °C the red HIGH TEMPERATURE led will automatically switch off and
PureOzone Machine will complete the previously selected treatment
SUGGESTED DURATION OF APPLICATIONS FOR PUREOZONE MACHINE
• 15 min: Compact Vehicles - Sport Cars - Station Wagons or
Rooms up to 10 m
• 30 min: SUV - Space Wagons - Commercial Vehicles - Minibus - Motor Homes or
Rooms up to 20 m
• 45 min: Busses or Rooms up to 30 m
• 60 min: Rooms up to 40 m
• 90 min: Rooms up to 50 m
EN
IST.AB1040.01
or Pet Kennels.
2
2
2
2
Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.
ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.
15" 30" 45" 60" 90"
HIGH TEMPERATURE
MODE START/STOP
2