nedis DTCTSC10WT Mode D'emploi page 5

6. Remove the mounting place
Turn the mounting plate of the smoke
alarm counter clockwise to get access to
the battery compartment of the smoke
alarm.
7. Battery compartment 9 V battery
8. Battery compartment 1.5 V AA battery
9. Safety catch
The safety catch prevents installing the
smoke alarm on the mounting plate
without inserting the battery first. Note:
push the safety catch of the 1.5 V AA
battery into the battery compartment
when placing the batteries.
10. Placing the 9 V battery
Take off the plastic seal of the 9 V battery
and place the 9 V battery in the battery
compartment. Conform to the polarity
markings inside the battery compartment.
5
ENGLISH