Télécharger Imprimer la page

Tristar TR-2592 Manuel D'utilisation page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Operation and maintenance
Remove all the package of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage adaptor : AC220-240V 50Hz. Rated voltage device 4,5V 1000Ma.
Never use the appliance near a sink filled with water or something.
Never try the equipment that fell into the water to grab but first remove the plug from the socket.
Use
Insert the small plug of the charger (No. 6) at the bottom of the device and insert the charger
into the socket. The charging light (No. 5) lights green.
Make sure the device is switched off when you start charging.
Charge the device at least 12 hours before using it for the first time wireless and after a long
period of disuse. When the device is fully charged, you can use it wirelessly up to 40 minutes.
To optimize battery life you should the battery twice a year fully discharge by to running the
device until it stops. Then fully charge the device.
Tip: You can also shave when charging, connect then the shaver to the charger and insert it
into the socket.
Remove the cap on top of the three flexible shaving heads (No. 1) and switch the shaver on by
pushing the on / off switch (No. 4) up, for disabling the device slide the switch back down.
Move the shaving heads on your skin, making both straight and circular movements. Shaving
on a dry skin gives the best results. This razor is especially designed for shaving or trimming of
facial hair.
Take your time when you shave sensitive areas for the first time. You need experience with the
device and your skin also needs some time to get used to the device.
To use the trimmer (No. 3), slide the trimmer on the back of the device up, see Figure A. Turn
it on with the on / off switch (No. 4) and trim its desired area, see Figure B. Turn the unit off
after use and slide the trimmer back down, see figure C.
A
B
C
9
UK
Cleaning
Clean the appliance after each use. Turn off the device and press the release button (no.3),
see Figure D. The shaving lid opens, bladder and / or shake the hair from the shaving head,
see Figure E. Rinse the razor with warm water and use the supplied brush to thoroughly clean
the various parts, see Figure F. Do not use detergents. Only keep the shaving heads under the
water, not the total appliance. Never immerse the appliance in water or other liquid, the
appliance and its various parts are not dishwasher safe. Let the shavinghead dry and close the
shavinghead lid,see Figure G.
D
After each use of the trimmer remove the hairs with the supplied cleaning brush and a regular
drop an acid free oil between the blades.
E
F
10
G

Publicité

loading