Domo DO7312M Mode D'emploi page 29

DO7312M
Quiet
No burning nearby objects
No oil - leakage
No dehumidifying
Back panel storage room for attach
power cord
UNIT LAYOUT
9
1. Handle
1
2. Temperature control light indicator
8
3. Switches min, med, max.
2
4. Anti - frost function
3
5. Temperature control knob
6. Wheel
4
7. Wheel mounting
8. Cord storage room (Back Panel)
7 5
6
9. Top cover (extra protection for
babies & young kids)
REMOVE PACKAGING
PLEASE READ ALL THE INSTRUCTION BEFORE USING THIS HEATER
Take the heater and the packaging out of the gift box.
Spread the paper inserts at two ends of the heater.
Remove the polybag (CAUTION: THIS BAG IS NOT A TOY. Keep away from
children).
Take the wheels and wheel mountings out of the paper inserts and the cord storage
room of the heater.
Save the packaging for storing the heater, while not using the heater or in the summer
season.
INSTALLATION OF WHEELS AND WHEELS MOUNTINGS
PLEASE READ ALL THE INSTRUCTION BEFORE USING THIS HEATER
Insert the castor plastic shaft into the hole of the feet suppoert until it clicks.
Carefully slide the wheel mountings into the heater.
Take the power cord out from the cord storage room
- The Temperature control knob at [DOT] position.
- Also both the (Minimum) and (Medium) switches at off position.
Plug in power cord to a suitable electrical outlet. (Rated not less than 13 AMP)
- For low temperature, press left hand side (Minimum) button.
- For medium temperature, turn off left-hand side (Minimum) button, press right-hand
side (Medium) button.
- For high temperature, press both buttons on.
Then turn the temperature control knob clock - wise until the light indicator turns on.
29