Technical Data; First Use And Charging The Powerpacks - therm-ic MAX+ POWERPACK Mode D'emploi

Powerpacks are water-resistant. If you have
attached the Powerpacks to your shoes, the
packs should always be connected to the
heatable soles when outdoors (even if not
switched on). This will prevent moisture and dirt
from entering the connecting socket or plug. If
water does enter the connectors, drain the
Powerpack and let it dry.
For recharging, only use the Therm-ic original
power adapter. It is designed for indoor use and
may not be exposed to damp surroundings.
Do not insert any metal or other object into
connecting sockets or plugs as this could cause
damage to the unit.
As the contact pins on the Powerpack are also
conductive even when disconnected, you must
not store the Powerpack together with metallic
objects (such as paperclips, aluminium foil, etc.).
Do not use the unit if you discover any damage to
connecting cables or other parts. Do not make
any modifications to the unit or use it for any
unintended purpose. Repairs to the unit or its
connecting leads are only to be carried out by the
manufacturer.
If questions or problems arise, please get in touch
with your dealer or the manufacturer.
Dispose of used Powerpacks properly.
Do not throw the Powerpacks into an open fire, as
there is a risk of explosion
TECHNI CA L DATA
Standard charger (available accessory from
Therm-ic):
Input: 120V or 230V, as desired
Output: 2x (6V / 150 mA)
FI RST US E AND CHARGI NG THE
P O WE R PA C KS
1. Important:First, connect the charger to the
socket. Plug both Powerpacks into the charger.
The switch must be at the "0" position.
2. The Powerpacks must be charged at room
temperature for at least 11 hours, but no more
than 13 hours.
9