Mounting The Guide Roller - BDS Maschinen SKF 25 Mode D'emploi

Milling with the machine

Mounting the guide roller

Milling plates
Milling pipes
38
Mount the plate (3) according to the illustration.
‹
Fix the guide rollers (2) in the borehole (1) with the washer
‹
and nut.
Mount the plate (1) according to the illustration.
‹
Fix the guide rollers (3) within the oblong hole with the t-
‹
nuts (1). The position within the oblong hole depends on the
pipe diameter.
1 2
3
1
2
3
SKF 25