Miscellaneous - Medisana Minibreeze Mode D'emploi

4.1 Troubleshooting
Trouble
Humidifier does not
operate and the LED
does not light up.
The water mist produces
an unpleasant smell.
The power light is on,
but the humidifier
doesn't work.
The output volume of
the mist is low.
Abnormal noise
Very tight tank cap
Probable cause
Mains adaptor not
plugged in
or the unit is
not switched on.
No water in
bottle tank
The mist outlet
is closed.
New machine
Dirty water or the
water is left in the
bottle tank for
too long.
Too much water in
the water flume
The transducer is
dirty.
Water is too dirty
or water kept too long
in the bottle tank.
Resonant in bottle
tank when water is
too less.
Unit is on an unstable
surface.
Over tightened

4 Miscellaneous

Solution
Plug in mains adaptor
and switch unit on.
Fill bottle tank
with water.
Open the mist outlet by
folding it upwards.
Open the bottle tank
and leave it for
12 hours at shady
and cool place.
Clean the bottle
tank and change
the water.
Pour away some
water from the
water flume.
Clean transducer
by a soft brush.
Clean bottle tank and
change the water.
Fill water into bottle
tank.
Move the unit to a
stable flat surface.
Add liquid soap to
cap gasket for ease
opening
GB
17