Publicité
Les langues disponibles
Les langues disponibles
User manual
01
02
03
04
102 mm Ø
Table mount
Drill a hole with an annulus Ø of 102mm to
insert the unit.
Remove the cover
Use a fine head screwdriverto remove the cover
of the anchor mechanism, as shown in diagram
2.
Fixing the unit system
Before inserting the unit system, check that the
anchor flaps are closed, if not, close them by
turning it with the screwdriver. Once you have
completed this operation, insert the unit system
in the hole you have drilled. Diagram 3.
Example of how the anchor system works.
IMPORT ANT: If the operationis performedusing
an electric screwdriver, adjust the power so that
it does not damage the anchor system.
ES EN
Publicité
