H.Koenig STW25 Manuel D'utilisation page 5

degree after one hour, and about 51 degree after eight hours.
CONTROL PANEL OPERATION
1. The LCD displays time, 12.00 by default on the first connection.
Press once the "ON / OFF" button "RUN" will light up and you can set the clock.
Set the clock:
A) Press once the "PROG" button, the screen will display "CLOCK", then you can set
the clock. Press "HOUR" This will change the hour. To speed up, you can hold the
"HOUR" button pressed, otherwise the time forward one hour each time you press the
button.
B) For minutes, just press the button "MIN". The operation is identical to that for hours.
2. C) After setting the time, press "PROG" until "CLOCK" disappears from the screen.
3. AUTO Programming:
If you press twice on the "ON / OFF" button instead of "RUN", the LED "AUTO" will
light.
Automatic programming:
(A) Press twice the "PROG" button, the display shows "TIMER". Sever then the time
("HOUR") and minutes ("MIN"). After the selected time, press "PROG" and the word
"TIMER" disappear.
(B) The unit will automatically start at the scheduled time.
4. If you press 3 times to "ON", the machine reboots.
5. There is no callback function.
TECHNICAL IN FORMATION
Input voltage : 220-240 VAC
Power : 950-1100 W
Container : 1.50L
CLEANING
1. Do not forget to remove the plug from the socket before cleaning the appliance.
2. Wipe outside with soft dry cloth when coffee machine is wet never use metal polish.
3. The removable items should be washed in hot soapy water. Rinse them before
FIXING
4. Wash the filter and carafe.