In order to monitor the UPS parameters and manage the automatic shutdown of the computer
powered by the UPS itself, it is possible to download the UPS Communicator software (Windows
only) from the website Legrand www.ups.legrand.com in the software section.
For additional information download and read the UPS Communicator manual on the web site.
Connect
Indicators & Alarm Table for Operation
Condition
Line mode
Battery mode - normal
battery voltage
Battery mode - low battery
Fault mode
Alarm for over temperature
protection
20
®
Blue led
Always on
Blinks every
10 seconds
Blinks every
1 seconds
OFF
OFF
4 UPS software
5 Signals and control
Red led
Buzzer
OFF
OFF
1 Beep every
OFF
10 seconds
1 Beep
ON
every second
ON
Continuous beep
Blinks every
NO
1 second