Straightening Hair - Silk-n GoSleek IR Mode D'emploi

indicator lights on the temperature display
has reached the default operating temperature (190 °C) (see Fig. B).
3. To select another operating temperature, press the control button repeatedly
to cycle through the temperature settings and select a desired one. There are
five temperature settings: 130 °C, 150 °C, 170 °C, 190 °C and 210 °C. Once a
new temperature setting is selected, the indicator lights on the display flash until
the hair straightener has reached the newly selected operating temperature.
Below are recommended settings. If you are unsure, start with a lower
temperature and increase the temperature as necessary.
Temperature
130 °C / 150 °C
170 °C / 190 °C
210 °C
4. To switch off the hair straightener, press and hold the control button until all
indicator lights on the temperature display go out. For safety purposes, the hair
straightener will automatically shut down after 1 hour (Auto Shut Off Protection)
in case you forget to switch it off.
6.3

Straightening hair

WARNING! RISK OF INJURY!
• Ensure that the heating plates do not touch
your scalp.
• Never touch the heating plates and the
upper part of the hair straightener during
use.
• Always pull the hair straightener through
the hair. Never stay at one position for too
long. You may singe your hair!
1. Prepare the hair as described in the chapter "Before straightening".
2. Switch on the hair straightener and select a desired operating temperature (see
chapter "Switching on/off and selecting a temperature").
3. Take a hair section and pull it taut by holding its end tightly between your index
and middle finger of the hand that is NOT holding the hair straightener.
4. Clamp the hair section near the root by pressing the heating plates
5. Glide the hair straightener downwards from the root to the tip through the
heating plates (see Fig. C).
2
Hair type
Fine, damaged or chemically treated
Normal
Thick, curly, not chemically treated
flash until the hair straightener
1
EN
together.
12