Schneider Airsystems NZ-SYS Notice D'utilisation D'origine page 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.4 Technical data
Air consumption
Max. permissible pressure
Rivet guide
Riveting force
Sound pressure level L
as per DIN 45 635, part 20
Pulse sound power level L
as per DIN 45 635, part 20
Vibrations as per DIN ISO 8662
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
03 Head piece
04 Carrier piece
05 Oil piston housing
06 Cover nut
08 Counternut
14 Safety cover
(at distance of 1 m)
pa
wa
1.2 Scope of delivery
– Riveting tongs
3
– Carrier piece ( 7 x )
3
– Assembly key ( 2 x )
3
– Claw housing
3
– Sealing kit
3
– Spring ( 4 x )
3
– Oil bottle
4
– Systainer
– Instruction manual
1.3 Conventional use
The compressed air riveting tongs
is an industrial tool designed for:
Riveting together suitable materials in differ-
ent application areas.
Any other type of use is considered contrary
to the intended use.
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
NZ - SYS
1,14 l/stroke
6,3 bar
2,4; 3,2; mm
4,9; 4,8
12000 N
55 dB(A)
62 dB(A)
2,2 m/s
165 x 80 x 278 mm
9 mm
1,7 kg
GB
2
I/ 3