Publicité
Les langues disponibles
Les langues disponibles
interior
1/2/05
14. OTHER POSSIBLE PROBLEMS AND THEIR SOLUTION
Faulty working order
The screen remains blank when connecting
the device, despite having batteries.
No pressure despite the pump working.
The device frequently fails when measuring
arterial pressure, or the values measured
are too high/low.
The results are different with each
measurement despite the correct working
order of the device and it indicating normal
values.
The values measured with this device differ
from those taken by the doctor.
15. ADDITIONAL INFORMATION
The level of arterial pressure is subject to fluctuations, even in healthy people. It is important to
bear in mind that comparable measurements always need the same conditions (of calm).
If, despite observing all these factors, the fluctuations are higher than 15 mmHg and/or
irregular beat tones are occasionally heard, consult your doctor.
Consult a specialized seller if you have problems with the device. Do not attempt to fix the
device yourself.
Unauthorized opening of the instrument will leave any claim under the guarantee null and void.
14:46
Página 19
Solution
1. Ensure that the batteries are fitted
according to the polarity and, if
necessary, insert them correctly.
2. If the display data is unusual, reinsert the
batteries or replace them.
• Check the armband tube connection and
if it is necessary to connect it correctly.
1. Check the position of the tensometer.
2. Measure the arterial pressure again in a
state of rest and calm, observing the
details indicated in "Basic Rules".
• Pay attention to the following
"Additional information" and to the
points listed in common "Error
Messages", then repeat measurement.
• Record the daily evolution of the values
and consult your doctor.
20
Publicité
