Start Up - Medisana FTD Mode D'emploi

2.1 The scope of delivery includes a battery (3 V CR2032). A low battery
charge is indicated by the battery symbol
Battery
the display
display
In this case the battery should be replaced as soon as possible. When
the battery capacity has been used up, the symbol "Lo" appears in
the display
beep is heard (see fig.).
The thermometer can no longer be used without changing the
battery. Press the On/Scan button
This thermometer is equipped with a safety catch in order to keep the
2.2
battery away from children. Push in the knob for opening the battery
Battery
compartment
change
(Fig.). A 3 V CR2032 lithium battery is required for this thermometer.
The battery must be inserted with the positive terminal (+) on top.
When the thermometer is used for the first time or after a battery
2.3
change, the time must first be set. Then the ambient temperature
Time and
measuring mode is automatically activated.
ambient
temperature
.
3
as well as the flashing battery symbol
3
with a pointed object and remove the battery
8
Knob for opening battery compartment
BATTERY SAFETY INSTRUCTIONS
• Keep away from children!
• Do not short-circuit!
• Do not throw used batteries away with the domestic
rubbish. Please put them in the special rubbish or a battery
collecting station in a specialist dealer's shop.
2 Start-up
in the lower area of
11
to switch off the device.
2
• Do not recharge!
• Do not throw in the fire!
GB
and a
11
15