Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
a
Quick start guide
Vacuum cleaner
For more information see the extended manual
online: ned.is/vcbs300gn
Intended use
This device is exclusively intended as a vacuum cleaner for indoor
use.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
Bent end
2
Dust container button
3
Tube
4
Motor filter
5
Power button
6
Air outlet filter
7
Air outlet grid
8
Floor brush
Safety instructions
WARNING
-
•
Only use the product as described in this manual.
•
Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately.
•
This product can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user
maintenance shall not be done by children without supervision.
•
Do not immerse the product in water.
•
Do not unplug the product by pulling on the cable. Always
grasp the plug and pull.
•
Do not use the power cable to carry the device.
•
Do not pull the power cable over sharp edges.
•
Do not close a door on the power cable.
•
Do not put any objects into openings. Do not use with any
opening blocked. Keep free of dust, lint hair etc.
•
Keep hair, loose clothing, fingers and all body parts away from
openings and moving parts.
•
Do not vacuum hard or sharp objects such as glass nails, screws,
coins etc.
•
Do not vacuum hot coals, cigarettes, matches or any hot
smoking or burning objects.
•
Do not use without filters in place.
•
Turn off all controls before plugging or unplugging vacuum
cleaner.
•
Use extra care when vacuuming on stairs.
VCBS300GN_MAN_COMP_0919_print_(19390 1422)_v02.indd 6
VCBS300GN
9
Accessory nozzles
10
Accessory holder
11
Hose
12
Dust container
13
Rewind button
14
Suction hole
15
Power cable
•
Do not vacuum flammable or combustible materials (lighter
fluid, gasoline, etc.) or use in the presence of explosive liquids or
vapor.
•
Do not vacuum toxic material (chlorine bleach, ammonia, drain
cleaner, etc.)
•
Do not use in an enclosed space filled with vapors given off by
oil-based paints, paint thinner, moth proofing, flammable dust,
or other explosive or toxic vapors.
•
Always unplug the appliance before connecting or disconnecting
vacuum hose. Do not allow plug to whip when rewinding.
•
Only use on dry, indoor surfaces.
•
Store your appliance indoor in a cool, dry area.
•
Keep the end of the hose, wands and other openings away from
your face and body.
•
Do not use the cleaner to clean your pets or any animal.
•
Keep the head (eyes, ear, mouth, etc.) away from the openings,
when the cleaner is working or plugging.
•
If you hear a squeaking sound and suction power is reduced,
unplug the device and clear of blockages and clean the air filter.
Prepare the vacuum cleaner (image B)
w
1. Insert the end of A
into A
3
w
2. Attach A
to A
by fitting it into A
8
3. Fit A
or the desired nozzle A
Use the vacuum cleaner
4
Always remove the power plug from the power outlet before
assembling or removing accessories.
4
When unwinding, guide the power cable with your free hand to
ensure it does not whip, cause damage or injury.
4
There are two marks on the power cable.
•
The yellow mark shows the ideal cable length.
•
The red mark shows the maximum cable length.
y
1. Unwind A
and plug it into a power outlet.
5
2. Use A
to switch on the device.
5
3. Use A
to switch off the device.
y
4. Unplug A
from the power outlet after use.
y
r
5. To rewind A
, press A
Cleaning dust container and filters (image C)
4
The filters should be cleaned every 6 months or as soon as
suction power is weakened.
4
The filters should be checked regularly for signs of damage,
preferably after each cleaning task.
4
The filters must be replaced immediately if they are damaged.
4
Always disconnect the vacuum cleaner from the power outlet
before checking the filters.
46
4
Allow the parts A
C
them back into the vacuum cleaner.
2
1. Press A
.
e
2. Lift A
out of the vacuum cleaner.
2
3
3. Press C
to open C
.
e
4. Empty A
.
1
e
5. Take C
out of A
and rinse with water.
4
e
6. Take A
out of A
and rinse with water.
6
t
until it snaps in position.
1
.
9
3
to A
.
.
1
to dry completely before fitting
19-9-2019 15:58:17
Publicité
Table des Matières
