Opening / Closing - GST SOLAR Basic Mode D'emploi

1.1 Opening
Example with factory code.
Button
1 2 3 4 5
After correct entries, the handle of the locking mechanism can be moved and the safe opened.
Only pull the handle once the lock has been completely opened (LED blinks 1x).
After an incorrect entry, the procedure can be repeated three times. Then, a blocking period
of 5 minutes goes into effect (manipulation block).
1.2 Closing
Ensure that the handle of the locking mechanism is completely in the closed position.
Button / example
C
After pressing the button
lock has locked. After locking, you must check whether the container is closed by pulling the handle
of the locking mechanism.
Gebäude Sicherheitstechnik Vertriebs GmbH, 34123 Kassel

1. Opening / Closing

6
3sec
Signal
3sec
C
, the handle of the locking mechanism may not be pulled until the
Signal
Correct
Solar-Basic (DE, EN, FR)-17000000-Rev. 1.3 / 01-2015 5/13
Description
Code input
Description
Closing
Closed
Incorrect