Troubleshooting - USRobotics 7908A Guide D'installation

Troubleshooting

My 8-Port 10/100Mbps Ethernet Switch is properly connected to my Ether-
net-ready device but my connection speed is slow.
Possible Solution:
Verify that your network adapter and/or additional Ethernet-ready device supports 100 Mbps. You
may be using a 10 Mbps device. A blinking orange light indicates you are receiving and
transmitting data at 10 Mbps. A blinking green light indicates you are receiving and transmitting
data at 100 Mbps. To achieve 100 Mbps speeds, replace any 10 Mbps devices you are using with
100 Mbps devices.
Possible Solution:
Verify you are using a known and reliable RJ-45 Category 5 Ethernet cable. An old or unreliable RJ-
45 Category 5 Ethernet cable could diminish your link quality. It may be necessary to replace your
RJ-45 Category 5 Ethernet cable.
Possible Solution:
The length of the Ethernet cable between your 8-Port 10/100Mbps Ethernet Switch and your
workstation or computer should not exceed 328 feet.
Possible Solution:
Some power sources with strong electromagnetic fields may also be causing interference.
4