ExPelec X LIGHT 320 LED Manuel D'utilisation page 6

3. Power Cable
4. Sound Potentiometer (Adjust the sensitivity of the sound)
5. Midi connector
INSTALLATION
For hanging or putting in a flat surface
This fixture can be putting in a flat surface or hanging with the clamp. If you want to hang it, please be sure
that you will fix it in the clamp as per the below sketch map. For more safety, please use the safety cable to
hang the fixture. Please note that the safety cable must be able to hang up to 10 times weight of this fixture.
TROUBLE SHOOTING
1. If the fixture does not light on, please check the power connection and make sure that the switch is
connected.
2. If the fixture sometimes light on and sometime shut off. Please check if the power is not connected
properly or loosen wire in the cable. If you cannot correct it, please call a certificated engineer to maintain and
service.
3. If you have any questions for this manual, please contact the certificated engineer.