Publicité
Les langues disponibles
Les langues disponibles
DO7338H
control panel Settings
high power 'II'
(2000W)
low power 'I'
(1300W)
off '0'
fan
working instructions
•
Place the device on a level surface.
•
Plug in the electrical cord into a power socket.
•
The device has two knobs: a function knob (silver) and a thermostat knob
(orange).
•
Use the function knob to choose a setting between fan, off '0', low wattage 'I' or
high 'wattage'. When you turn off the knob, the red power light indicator will turn
on.
•
The thermostat knob is used to control the temperature. When you turn the device
on, you turn the thermostat knob counter clockwise on its highest setting. When
the desired room temperature is reached, you turn the thermostat knob clockwise
to its lowest setting, so the device stops warming. In this setting, the thermostat is
equal to the room temperature. Whenever the room temperature drops, the device
will turn on again until the desired room temperature is reached again. This allows
you to keep the room temperature a constant.
•
To turn the device off, you turn the thermostat knob to its lowest setting and put
the function knob in its '0' setting.
•
On the top side of the device, there is a button that allows automatic swing. Put
this button in the 'I' setting to make the device swing automatically, allowing for
the air to spread better. To make the device stop automatically swinging, turn that
button in its '0' setting.
power light
indicator
40
thermostat
indicator
Publicité
