AXIL NR1003 Manuel D'utilisation page 9

INSTALLING BATTERY
Remove the battery cover. Follow the polarity direction and install 3pcs AA size (1.5V) batteries into battery
compartment. Close the battery cover.
SETTING TIME
1. Slide the switch button to the position of " " (Time Setting). The time display will flash.
2. Press "HR" and "MIN" to set the right hour and minute.
3. To exit the setting time display, slide the switch to "
SETTING ( Vibration Silent / Crescendo alarm )
1. Slide the switch button to the position of " " (Alarm Setting). The alarm time display will flash.
2. Press "HR" and "MIN" to set the right alarm hour and minute.
3. Slide the switch button to " " position to complete setting.
4. To activate the alarm, slide the switch button to choose Vibrating (silent) alarm "
or Crescendo alarm " " .
5. When the alarm time reaches, the alarm will start. Turn the button to "OFF" to stop the alarm or it will stop
automatically after 1 minute.
LIGHT/SNOOZE FUNCTION
1. Press the "LIGHT/SNOOZE" button to turn on the light function.
2. When the alarm sound starts, press "LIGHT/SNOOZE" button to turn on the light & snooze function.
The alarm sound will stop and start again after 4 minutes.
Instruction manual
Vibrating silent alarm
Crescendo alarm
Alarm off
Time setting
Alarm setting
Lock
" (Lock) position.
"