Victron energy PPP-8 Manuel page 19

Peak Power Pack
Capacity
Stored energy
Battery type
Nominal voltage
No load battery drain when on
Battery drain in storage mode
Continuous output current
Maximum output current (10 s)
Short circuit trip level
Protections
Maximum input (charge) current
Maximum input (charge) voltage
Maximum cable cross section
Continuous output current
Maximum output current (10 s)
Short circuit trip level
Protections
Maximum input (charge) current
Maximum input (charge) voltage
Maximum cable cross section
Input 1: multi-purpose vehicle battery / solar charger input
Input voltage range
Input current limit
Adapter output voltage
Adapter output current
Adapter input voltage
Monitoring and control
VE.Direct port
Operating temperature range
Humidity (non condensing)
Weight
Dimensions (h x w x d) in mm
Safety
Emission, Immunity
PPP-8 PPP-20
8Ah 20Ah
102Wh 256Wh
Lithium-ion ( LiFePO4)
<13Ah / year (< 1,4mA)
< 6,5Ah / year (< 0,7mA)
Output 1: high current output
Overload / short circuit / over temperature / over discharge
40A (not protected)
14,0V (not protected)
16 mm² (screw terminals)
Output 2: auxiliary output
n.a.
n.a.
n.a.
n.a. Overload/short circuit/over temperature/over discharge
n.a.
n.a.
n.a.
Input 2: power adapter
100/240VAC
GENERAL
Multi-functional push button with bi-colour LED
Connects to a computer (VE.Direct to USB cable needed) or a smart phone
(VE.Direct Bluetooth Smart dongle needed)
Batt. charging: 0°C to 40°C
Storage: -20°C to +40°C
(charging / discharging inhibited when outside specified temperature range)
2,2 kg 3,8 kg
190x172x90 190x172x130
STANDARDS
EN/IEC 60335-1, EN/IEC 60335-2-29, EN/IEC 62109
EN 55014-1, EN 55014-2, IEC 61000-3-2, IEC 61000-3-3, EN 50498
PPP-30
30Ah
384Wh
12,8V
150A
200A
300A
30A
50A
80A
10A (not protected)
14,0V (not protected)
6mm² (screw terminals)
11V < Vin < 25V
7A
15V
3A
50/60Hz
Batt. discharging: -20°C to +40°C
Max 95%
5,4 kg
190x172x170
PPP-40
40Ah
512Wh
8,6 kg
190x172x210
1