Declaration Of Conformity (Ec) - ELAD FDM-DUO Mode D'emploi

ELAD FDM-DUO
The product marked as
FDM-DUO
manufactured by
Manufacturer:
Address:
is produced in conformity to the requirements contained in the following EC directives:
 R&TTE Directive 1999/5/CE
 EMC Directive 2004/108/CE
 Low Voltage Directive 2006/95/CE

RoHS Directive 2011/65/CE
The product conforms to the following Product Specifications:
Emissions & Immunity:
ETSI EN 301 489-1 V1.9.2
ETSI EN 301 489-15 V1.2.1
ETSI EN 301 783-2 V1.2.1
Safety:
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
And further amendments.
This declaration is under responsibility of the manufacturer:
ELAD S.r.l.
Via Col De Rust, 11 - Sarone
33070 CANEVA (PN)
Issued by:
Name: Franco Milan
Function: President of ELAD
Caneva
Place
© 2020 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated
in any form or by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.

Declaration of Conformity (EC)

ELAD S.r.l.
Via Col De Rust, 11 - Sarone
33070 CANEVA (PN)
th
July, 30 2014
Date
Mode d'emploi - version 2.11 - 09/2020
Signature
87