Information About The Product; Before First Use; Installation; Operation - Reflecta DigiEndoscope Mode D'emploi

Information About The Product

The product is designed as a remote inspection device. It can be used to look into tight spots
and beam back real-time video to its LCD monitor. Typical applications might include HVAC,
termite and other insect or building inspections, cable routing, automotive/boat/aircraft
inspections etc.

Before First Use

Remove all packaging materials and check the scope of delivery for
completeness (IN THE PACKAGE).

Installation

Please install the batteries before using the product, choose the accessory according to the
actual situation. Steps of installation as following:
To Install Batteries
1. Using a screwdriver, remove screw and cover
2. Remove battery compartment and insert 4 new AA (1.5 V) batteries into the proper slots in
the battery compartment. Proper battery orientation is indicated on the battery compartment.
3. Reinstall battery compartment, battery cover and screw.

OPERATION

Switching On/Off
BEFORE USING THE UNIT FOR THE FIRST TIME:
● Ensure the time and date have been set
● Ensure the SD card is inserted
Press the ON/OFF button (2) to switch the device on.
The camera image will appear on the screen and the Power indicator (8) will illuminate
green
To switch the device off press
The ON/OFF button
4