Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Plug the amplifier into a free USB port on your PC, MAC or laptop using the USB A plug [1]. The
amplifier is supplied automatically with a current via the USB connection and switched on. The
operating system will load the required driver the first time you make the connection. This can take a
short while.
Plug the headphones into the headphone connection [2].
Set the desired volume suing the + button [3] and the - button [4].
SCOPE OF DELIVERY
1 x Premium Headphone Amp No. 2
1 x operating manual
TECHNICAL DATA
Output rating:
maximum 2 x 320 mW
Impedance:
Signal-to-noise ratio:
96 dB
Crosstalk attenuation:
60 dB
Amplification:
Distortion factor:
< 0.008% (10 mW)
Frequency range:
DISPOSAL
Old or defective devices that are labelled with a crossed-out rubbish bin may not be disposed of with
conventional household waste. They must be handed in at local recycling centres in accordance with the
applicable national legislation. Proper disposal helps to conserve resources and protect the environment
Simplified EU declaration of conformity
Hereby, in-akustik GmbH & Co. KG declares that this device is in compliance with directive 2004/108/EG and
RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.in-akustik.com
MISC
Indication without guarantee. All product images similar. We reserve the right to make changes.
Designation: Premium Headphone Amp No.2
Item-No: 00415006
EAN: 4001985511808
Made in China
8–300 ohms
0 dB
22 Hz – 65 kHz
UNSER MANUAL
07
Publicité
