Timex M623 Mode D'emploi page 2

Pairing
In order to assure that your Foot Pod sensor data is being received
by your compatible watch, follow your watch's instructions for the
pairing procedure.
After you pair the sensor and the watch for the first time, the watch
will always recognize your Foot Pod sensor. You will not need to
repeat the pairing process until you replace the battery in the Foot
Pod sensor or decide to use a different watch.
Installation
Prior to installation, detach the Foot Pod sensor from the Lace Clip.
Hold the Foot Pod in one hand and press down on the small tab of
the Lace Clip (on the Arrow) to disengage the two parts.
Installing on Shoe Laces
1. Slip the Lace Clip under the lowest two crossed laces, with the
Arrow indicator pointing toward the front (toe) of your shoe.
2. Tie your laces securely to keep the Lace Clip (and Foot Pod
sensor) from shifting during use.
3. Snap the Foot Pod into the Lace Clip, so the words "STRIDE
SENSOR" printed on the sensor are closest to the front of the
shoe.
1