Worksite CSW198 Manuel De L'utilisateur page 19

A
F D
C
E
J
K
I
H
G
A - Saw blade
B - Switch
C - Lock button
D - Upper guard
E - Bevel locking lever
F - Parallel guide lock screw
G - Parallel guide
H - Clamping flange
I - Clamping screw
J - Lower guard guide lever
Check for damage to the tool, parts and accessories that may have occurred during transportation.
Take some time to read this manual carefully and understand all the content prior to assembly and
operation.
CAUTION
Always ensure that the tool is switched off and unplugged from the main power
supply before assembly.
Changing the Blade
- Place the saw on its side on a flat surface.
- Rotate the saw blade (A) by hand while depressing the spindle lock button (N) until the blade is
locked. Turn the blade clamp screw (I) using the provided hex key in a clockwise direction.
- Remove the blade clamp screw (I) and the outer flange (H).
- Open the lower guard (K) by moving the lower guard lever (J). Remove the blade.
- Clean the saw blade flanges. Mount the new saw blade onto the spindle.
OVERVIEW OF COMPONENTS
B
M
L
ASSEMBLY
S R
N
K - Lower guard
L - Base plate
M - Storage for hexagon key
N - Spindle lock
O - Depth locking lever
P - Depth scale
Q - Dust outlet
R - Dust pipe
S - Machine housing
E
P
Q
O
Fig. 1
19