Télécharger Imprimer la page

Maxcom MT10 Guide D'utilisation page 2

Publicité

Les langues disponibles

Les langues disponibles

8005 St-Michel, Mtl, H1Z3C9, 514-727-5899
Lundi-Vendredi: 8H-17H Samedi: 9H-13H
Switch the Taxi Meter to "HIRED"
While the taximeter is in the "VACANT" mode, press
"KEY 1" to switch the taximeter to "HIRED". The
initial fare, "$FARE" and "HIRED" will be displayed
on the screen. The "VACANT" indicator will turn off.
The meter is now running in "Time-On" mode.
Switch the Taxi Meter to "HIRED-TIME OFF"
While the taximeter is in "Hired-Time-On" mode,
press "KEY 2" to turn the meter to "Time-Off" mode.
The "TIME OFF" indicator will be displayed and the
taximeter will stop charging for time. To resume
charging for time, press "KEY 2" again, the meter
will go back to "Time-On" mode and the "TIME
OFF" indicator will come off.
Use the "EXTRAS" function
You can use this function only if your meter is
programmed for EXTRAS. Ensure your meter is in
"Hired-Time-On" mode, press "KEY 3" to display the
pre-programmed extras amount on the screen,
pressing "KEY 3" again will add more "EXTRAS" to
the current "EXTRAS" amount until the
pre-programmed limit is reached. To total the
EXTRAS for the FARE, ensure the meter is in the
"HIRED-TIME OFF" mode, and press "KEY 3" once.
The total of the FARE and EXTRAS will be shown on
the screen for 5 seconds.
Switch the Taxi Meter to "VACANT"
Put the meter in the "HIRED-TIME OFF" mode first,
then press "KEY 1".
Select a RATE
Press "KEY 4" to select a new rate while the meter is
vacant. If the meter is programmed for "Rate
selection allowed while being hired", you can switch
the meter in the "HIRED-TIME OFF" mode first, and
then press "KEY 4" to select a new rate.
www.maxcommradio.com
Reviewing the STATISTICS
There are 7 statistic items stored in your taximeter, to
view them, press "KEY 3" while the taximeter is "VACANT".
Continue pressing "KEY 3" to scroll through all 7 items.
The item number is shown on the right side of the screen.
Pressing any keys other than "KEY 3" will turn the meter
back to "VACANT". If you press and hold "KEY 3" for 2
seconds, the display will flash and the item 2 "Daily gross
dollars, Cents" will be cleared.
You can clear all 7 items of statistics if your taximeter is
programmed to allow you to do this. Press KEY 3 to scroll
the statistics to item 7. Press and hold KEY 3 until the
display ashes. Now all 7 items of statics are cleared.
Fare
Last fare
Daily gross dollars
Gross dollars
Total trips
Total units increments
Total extras increments
Paid miles
facebook.com/maxcommradio
twitter.com/maxcommradio
MT10
USER'S GUIDE
Extras
Item
Last extras
1
Cents
2
Cents
3
4
5
6
7

Publicité

loading