Eureka 240 Série Guide Du Propriétaire page 4

The charger can be used either fitted to the wall or mounted on its floor support.
1. If fitting the charger to the wall, find a position close to a socket and mount the charger on the wall
using the screws provided. (Figure 1)
2. When using the charger mounted on its floor support fit the charger onto the base.
3. Plug the charging cable into the connection at the side of the charger back.(Figure 3)
4. Raise the handle and lock into place. To fold the handle back down, press the unlocking knob and
release the handle catch. (Figure 4)
4
Before using for the first time
Fig. 1
CLICK!
Fig. 2 Fig. 3
Fig. 4