STEINEL TT 40 Manuel D'instruction page 6

operating or still hot.
n USE ONLY IN WELL VENTILATED AREA.
n DO NOT TOUCH THE HEATED TIP OR BARREL OF
THE UNIT. The tip is extremely hot during use.
n Avoid contact with hands, skin and other objects.
n DO NOT REPLACE CAP WITHOUT SWITCHING UNIT
OFF AND ENSURING TIP HAS COOLED.
n Be extremely careful as torch flame tip
temperature is over 1300°C(2400°F)
n Do not touch the heated tip or knurled nut.
n When replacing batteries, replace all of the
batteries with correct type. Do not mix new batteries
with used batteries or batteries of a different type.
n Be sure to insert batteries properly (+/-).
n Do not touch Nozzle Barrel while igniting.
n Do not ignite the unit when "Nozzle Barrel" is not
screwed on.
n Only use STEINEL refill cartridge, disposable gas
lighter or similar product.
n Do not touch the nozzle cover or flame guard
during use, or before sufficient time has passed for
cooling.
n Do not use continuously for more than five (5)
minutes. Applies to model number Th 300, TT 100, TT
50 and TT 40.
IMPORTANT NOTE:
THIS TOOL HAS BEEN ESPECIALLY DESIGNED FOR
USE WITH 100% BUTANE GAS. ANY OTHER BUTANE-
PROPANE MIX OR OTHER FUEL GASES COULD
CREATE MUCH HIGHER TEMPERATURES AND INDUCE
"FLARE UP" AT THE TIP EXHAUST SLOTS.