Note Regarding The Inner Liner With Gas-Cooled Welding Torches - Fronius MTG 2500 S Instructions De Service

Note regarding
the inner liner
with gas-cooled
welding torches
1
1
NOTE! If a gas-cooled welding torch is used with a plastic inner liner and bronze
wire guide insert instead of a steel inner liner, the output data specified in the tech-
nical data has to be reduced by 30 %.
To achieve the maximum output from a gas-cooled welding torch, replace the 40
mm (1.575 in.) wire guide insert with the 300 mm (11.81 in.) wire guide insert as
shown below.
2
2
33