Inserting And Removing The Battery - brennenstuhl professional LINE LA 4010 Mode D'emploi

ILLUSTRATED COMPONENTS

INSERTING AND REMOVING THE BATTERY

The light is intended for use with the following batteries:
brennenstuhl professionalLINE AB 1805 battery
®
BOSCH battery GBA 18 V x,x Ah (up to max. 6.0Ah) Professional
Depending on the version, a battery is included in the delivery or can be purchased separately.
The battery can be quickly and easily installed. Open the two locks
Insert the charged battery
position (last of the two locking positions). To remove the battery, press the battery unlock button
the battery upward and out of the battery compartment.
The light may only be used if the battery cover is properly locked!
Remove the batteries from the unit in the event of longer periods of disuse!
SWITCHING THE LAMP LIGHT ON/OFF
Press the button to switch the light on. The light will then be lit at 50% brightness. To switch to maximum
F
brightness (100%), press the
a battery) of the lamp extends in comparison to the 100% setting as it consumes less energy. Press the
button again to turn the lamp off.
If the light is connected to the mains, the light is operated, as a standard, with mains voltage. In the event of
a power failure or it the power plug is disconnected, the light will automatically switch to battery mode if a
battery with a sufficient charge is installed in the battery compartment
If the battery is nearly empty, the LED light will blink 5 times. The light will then remain on for approx. 10 minutes
at 50% brightness, until the deep discharge protection switches the light off. This provides sufficient time
to replace the battery or stop working. After the battery-operated light automatically shuts off, do not keep
pressing the on/off switch. The battery may be damaged.
8 www.brennenstuhl.com
010916 BA_proLINE Hybrid_SMD-LED Strahler 40W (Aurolite).indd 8
into the battery compartment
C
button again. Please note: When selecting 50%, the lighting time (when using
F
A Battery cover locks
B Battery cover
C Battery*
D Battery compartment
E Battery unlock button*
F On/off button
G Light head
H Locking screw
I Cable holder/suspension device
* Illustrated or described accessories may not
be included in the standard delivery.
You can find all of the accessories in our
accessories program.
and fold the battery cover
A
from above until you feel it lock into the end
D
.
D
down.
B
and pull
E
F
20.06.17 13:02