Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - Schaub Lorenz 32LT33 Mode D'emploi

5. S/PDIF Coaxial Out
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view
all the channels that you subscribe to. For more information, see
"Conditional Access" section.
2. Side USB input.
3. Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV
and the VIDEO OUT jack on your device.
4. Audio Inputs are used for connecting audio signals of external
devices. Connect the audio cable between the AUDIO INPUTS on
the TV and the AUDIO OUTPUT jacks on your device. Note: If you
connect a device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO INPUTS of the
TV to enable audio.
5. Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
02_[GB]_MB60_woypbpr_3920UK_IDTV_32875W_BRONZE17_10070942_50179139.indd 47
outputs digital audio signals of the currently watched source.
English - 47 -
26.10.2010 14:30:34