Functions; Before First Use - Sage the Tea Maker Guide Rapide

Functions

BEFORE FIRST USE

In order to remove any dust or protective
residues from the manufacturing process,
it is recommended to run a boiling cycle then
discard the water.
1. Unwind the power cord completely and
insert the power plug into a grounded
wall outlet.
2. Press the left
button until the LCD screen
displays 100°C.
AUTO START
Green Herbal
Black Oolong
KEEP WARM
White Custom
BASKET
3. Press the HOT WATER / Cancel button
to start the cycle.
4. Discard the water. The Tea Maker
is now ready to use.
USE THE TEA MAKER
FOR BREWING TEA
1. Fill with desired amount of water. Ensure
you do not fill past the tea maximum mark
(1200mL TEA MAX).
2. Place the basket on a flat, dry surface.
Remove basket lid by lifting from the
sides.
8
ARROW UP
™
™
3. Use the provided tea scoop to fill the
basket with tea leaves. As a general
guide, use 1 scoop of tea leaves
per cup/250ml of water.
Selecting the tea type
Press the TEA TYPE button and toggle
through until the desired tea.
Selecting the tea strength
The desired tea strength determines the
brew time.
1. Press the TEA STRENGTH button and
toggle through until the desired tea
strength.
2. Press the TEA / Cancel button to start
the tea brewing cycle.
3. Once the selected brew temperature
is reached the assembled basket will
automatically lower into the heated water.
4. Once the basket reaches the bottom of
the glass jug, the LCD screen will indicate
the brewing progress.
5. At the end of the tea brewing cycle,
the basket will automatically rise to
the top of the glass jug.
WARNING
The tea basket is hot to touch after tea is
brewed. Ensure the tea basket handle has
cooled before handling.