Pushbuttons And Signals On The Electronic Control Panel; Instruction To Display The Parameters - Zanotti AS Rotary Série Notice De Mode D'emploi Et D'entretien

Electronic control unit: it can adjust the cold room temperature and control all the functions of the refrigerating
system.

8.2 Pushbuttons and signals on the electronic control panel

Meaning of the led's
A number of points is located on the display whose meaning is described in the following table.
8.3 Istruction to display the parameters
By pressing and releasing the
label will be displayed. Through the
Setting up the Setpoint:
To display the Setpoint value press the
The Setpoint value is displayed.
SET
(ENTER)
UP
Down
ON/OFF
Compressor Led
Fixed on: active compressor
Flashing: delay, blocked protection or activation
Defrost Led (De-frosting)
Fixed on: active de-frosting
Flashing: Mmanual activation or by I.D.
Fan Led
Fixed on: active fans
Led Alarm
Fixed on: alarm
Flashing: muted alarm
Led AUX
Fixed on: Cell light ON
key you can access the menu. If there are no alarms in progress the "Set"
and
- SEt: setting folder
- Pb1: environment probe value folder
- Pb2: end of de-frosting probe value folder
Press and release
It displays any alarm (if any)
It accesses the menu
Press and release
It scrolls the menu items
It increases values
Press and release
It scrolls the manu items
It decreases values
Press for at least 5 sec
It activates the ON/OFF function
keys the menu folders can be scrolled:
key when the "Set" label is displayed, then press "Set" again.
24