Audio Input Mode - KREAFUNK aGLOW Manuel D'utilisation

and the LED indicator
now slowly flashing blue. The
aGLOW is now ready to play
your favorite tunes. Short press
to play music.
4. When the connection between
your device and the aGLOW is
successful, and the speaker
is playing, the music will be
stopped when you receive an
incoming call. One shortpress
at the will answer the call
and use the aGLOW as a hands
free device. One long press at
/ will adjust the volume.
Please keep within 1-meter
distance during the phone
call. Short-press
up the phone. The aGLOW will
automatically return to playing
music. To reject the incoming
call, press and hold
seconds. To redial the previous
10
is
to hang
for 2
English
call number, short-press
twice.
5. If the pairing is unsuccessful
or if there is no flash indicator
showing, please repeat step 1
to 3 for re-connection.

5. Audio input mode

MP3, iPOD, mobile phone or other
audio products, which features mini
Jack cable, can be used. The green
indicator should now be on.
1. Insert 3.5mm /mini jack audio
cable into the audio input port.
2. Press and hold
adjust thevolume.
3. In 'audio line-in' mode, short-
press to play/pause. The
skip / next-function is not
available in this mode. Please
control music through your
music device.
4. Pull out the audio cable to
disconnect the aGLOW. The
/ to