Wagan Tech BT-TH02 RF Manuel D'utilisation page 5

When you enter in the Program mode, the first operation
is to choose the program number with LESS (-) or MORE
(+) key.
You can choose between a built-in program P1 to P9 or a
user program U1 to U4.
If you choose a Built-in program P1 to P9, you can only
see and chose the program.
P1: Morning, Evening & Weekend
P2: Morning, Midday, Evening & Weekend
P3: Day & Weekend
P4: Evening & Weekend
P5: Morning, Evening (Bathroom)
P6: Morning, afternoon & Weekend
7H – 19H (Office)
P7:
8H – 19H & Saturday (Shop)
P8:
P9: Weekend (Secondary house)
(See the Annexe parts to view a complete description of
the Built-in programs).
- Use the navigation keys LEFT (◄) or RIGHT (►) to
change the program day displayed.
- Press the ( ) key to confirm your choice and come
back to the main screen (in
If you chose a user program U1 to U4, as above you can
choose the program, see it, and you can also customise
it.
Default setting:
U1, U2, U3, U4 = comfort temperature all the week.
- Press (OK) key during 2 seconds to customise a user
program.
Symbols and explanation for program creation:
First step of the day
The wakeup hour need to be adjusted.
Middle step of the day ( Reduced temp.)
The leaving hour need to be adjusted
Middle step of the day ( Comfort temp. )
The comeback hour will need to be adjusted
Last step of the day ( Reduced temp.)
The sleeping hour need to be adjusted
- The minimum program step is 30 minutes
- Each time a value or icon blinks you are invited to make
a choice with LESS (-) or MORE (+) keys.
Once the choice is made press the ( ) key to jump to the
following step.
- The program creation will always start with the day
value 1 (Monday).
Once you are in the program change mode (after
pressing the (OK) key for more than 2 seconds), the
following display will appear:
mode).
( Comfort temp. )
Now you are invited to adjust the hour of the first step of
the program with LESS (-) or MORE (+) keys,
Press ( ) to validate and go to the following step.
Now you are invited to choose the type of the next step of
the program (blinking icons), 2 choices will be possible
(pressing LESS (-) or MORE (+) keys ) :
st
- 1 choice is the leaving icon
nd
- 2 choice is the sleep icon.
When the choice is made, press ( ) key to validate.
Then you can adjust the step hour with LESS (-) or
MORE (+) keys,
When step hour is set press ( ) to jump to the next step.
You will be directly invited to adjust with LESS (-) or
MORE (+) keys the hour of the comeback step.
Press ( ) to validate and go to the following step.
You are again invited to choose the type of the next step
of the program (blinking icons), with 2 choices:
5
, to add one step.
(End of the day).