Kruger KH12011CI Manuel D'utilisation page 28

KH12011CI-KH17013CI-KH20015CI
Starting stages
1. Open the water supply cock (A).
2. Open the gun and keep it open for a few seconds to allow the air in the
pipes to come out (B).
CAUTION: Grip the lance and the gun firmly with both hands.
3. Push key 1 (C) to switch on the machine keeping the washing gun open.
4. Rotate the knob (E) to regulate water pressure visible on the manometer
(F).
5. Turn the knob (D) round to the temperature required.
A
Stages to turn the machine off
1. Set the temperature (D) switch to 0° and wait about 30" to clean the
boiler.
2. Turn off the water supply tap (A).
3. Open the spray gun (B) and hold it open for a couple of seconds so that
the water in the line drains out.
4. Press button 0 (C) to turn off.
5. Close the spray gun (B).
6. Disconnect the machine from the electric supply by removing the plug
from the power socket.
A new machine needs a short period for running in the motor/pump set.
Running in consists of operating the machine for no more than 1 hour and
waiting for 1 hour for it to cool down; this should be done for 4 or 5 times.
E
F
B
WARNING :
28
C
C
D
D