Installation Instructions - De Dietrich DTE1148X Guide D'utilisation

1 / INSTALLATION INSTRUCTIONS

This grill uses 2.500 watts at its maximum position. Therefore, before connection,
‡
make sure that your electric wiring system is at least fitted with a 16-ampere fuse.
The grill must be compulsorily connected to an earth.
‡
The plug must be accessible after installation.
‡
If the supply lead is damaged, it must be replaced by an equivalent lead (H07RNF
3x1,5mm²) available from the after-sales department.
‡
It is also necessary to provide a bipolar cut-off device in your power supply circuit,
‡
where the opening of the contacts is more than 3 mm.
Cooking with the grill necessarily involves the emission of fumes. This factor will
‡
have to be taken into account when choosing the place where your grill is to be
fitted.
IT IS ABSOLUTELY IMPERATIVE TO LEAVE A SPACE OF AT LEAST 5 CM
BETWEEN THE BOTTOM OF THE GRILL AND THE FIRST SHELF OF THE
KITCHEN UNIT.
THE DISTANCE BETWEEN THE WALL AND THE REAR OF THE APPARATUS
SHOULD BE 5.5 CM.
WARNING : If the grill malfunctions in any way, unplug the appliance or
remove the fuse corresponding to the sector where the gril is hooked up.
12