Troubleshooting; Warranty; Declaration Of Conformity; On/Off" Switch - VITO PRO-POWER VIBCBSFL20 Mode D'emploi

EN
Problem - Cause
The tool doesn't activate when pressing the

"ON/OFF" switch:

� Discharged battery;
� The switch isn't working or the connections are
damaged;
� The rotation mode selector is in middle position and is
locking the switch;
The "ON/OFF" switch is locked:
� The rotation mode selector is in middle position and is
locking the switch;
The engine sounds irregularly, turns on
intermittently or spins slowly:
� Switch connections are damaged;
� Mechanical obstruction;
� The machine is running over excessive pressure,
engine in overload;
The equipment heats too much:
� Machine in overload;
� Incorrect housing or internal parts assembly;

9. WARRANTY

The warranty of this product is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as well
as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product, any
repairs carried out by unauthorized persons (outside the
service center of the brand VITO) as well as any damage
caused by the use of it.
24
8. FAQS / TROUBLESHOOTING
Solution
� Charge the battery;
� Repair or replace the switch;
� Press the selector rotating it over the desired rotation
direction;
� Press the selector rotating it over the desired rotation
direction;
� Repair or replace the switch;
� Check the mechanical parts;
� Reduce the pressure;
� Reduce the pressure;
� Check if there's any obstruction or parts touching the
shaft;

10. DECLARATION OF CONFORMITY

We declare under our exclusive responsibility, that the
product Meets the following standards or standardisation
documents: EEC 60745-2-1:2003(Second Edition)+IEC
60745-1:2006(Fourth
1:2009+A11:2010, EN 60745-2-1:2010, EN 60745-2-
2:2010, AfPS GS 2014:01 PAK, EN 55014-1:2006+A1+A2,
EN 55014-2:1997+A1+A2, EN 55014-1:2017, EN 55014-
2:2015 according to the determinations of the directives:
2006/42/EC - Machinery directive;
2014/30/EU - Electromagnetic compatibility directive;
2011/65/EU - RoHS Directive;
2000/14/EC - Sound power level mesured: LpA: 84 dB(A);
- Sound power level guaranteed: LwA: 95 dB(A).
S. João de Ver, 24 April 2018
Central Lobão S. A.
Responsible for the Technical File
Edition), EN 60745-
18