Ltc Audio SOUNDBAR5-BK Manuel D'utilisation page 5

REMOTE CONTROL
OPERATION
Switch on the SOUNDBAR via the Power switch on top of the unit. The default operation mode is BLUETOOTH.
Switch on the bass box. The 2 units will connect automatically. Once they are connected, SUBWOOFER
CONNECTED is displayed on the Soundbar.
Select the operation mode via the FUNCTION key on top of the soundbar or press the appropriate key on the remote
control.
TROUBLE SHOOTING
Problem Possible cause
No power You didn't connect the power lead
No proper audio connection
No sound
Volume is set to the minimum
Mute
Some phenomenon such as static electricity
Buttons don't react
might disturb normal operation
No battery inside the remote control
Remote control hasn't been aimed at the
remote sensor
Remote control
Too big distance between the remote and the
doesn't work
Soundbar
System halted
SPECIFICATIONS
Input power ..................................................................................................... 100-240Vac 50/60Hz
Output power ........................................................................................................... 2 x 15W + 30W
Operating environment ............................................................................... +5 to +35°C, 5-80% RH
Freq. response .................................................................................................... 20-20kHz +/- 3dB
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling
centre. Ask your local authorities or your dealer about the way to proceed.
SOUNDBAR5 Manual
1. EQ
2. STANDBY
3. Volume +
4. Previous
5. USB
6. Bluetooth
7. Optical
8. TF (micro SD)
9. Audio IN
10. Return
11. SD
12. Next
13. Volume-
14. Mute
15. Play/Pause
16. Coaxial
17. Stop
18. Repeat
19. Display
©Copyright LOTRONIC 2015
Solution
Connect the power lead
Connect the audio source to the proper input
port
Increase the volume
Press MUTE key to cancel the mute function
Power the unit OFF and ON or unplug the
power adapter and plug in again
Replace by fresh batteries
Aim the remote to the front of the Soundbar at
a max. deviation angle of 30°
Operate remote control within 8m
Unplug the unit from the mains and plug in
again
5