Publicité
Les langues disponibles
Les langues disponibles
• Type in the message field the message to display (max. 16 characters).
Special characters can be selected from the symbol list on the bottom right
of the screen. Use the scroll bar to see more symbols and characters.
• Select the pattern:
• Fix: the message will be shown for about 10 seconds per cycle
• Flashing: the message will flash 3 times per cycle
• Left to right: the message will build up from left to right; does one full
turn counter clockwise before being cleared from right to left. The speed
can be set to low, middle or high.
• Down to up: the message will build up from bottom to top; does one full
turn counter clockwise before being cleared from top to bottom. The
speed can be set to low, middle or high.
• All: every message cycles though the four previous patterns before the
next message is shown. The speed can be set to low, middle or high.
• Up to 32 messages can be displayed in sequence, but keep in mind that the
total memory for all messages is limited to 128 characters. Use the scroll bar
to see more message fields.
• Use the 'Preview' button to see a preview of the message and effect in the
preview-window at the bottom left of the application window.
• Use the 'Demo All' button to see a preview of all the messages and effects
in the preview-window.
• Use the 'Burn' button to write the messages file to the fan. When the
message file was transferred successfully, the LED on the USB adapter (2)
will be green and following message is displayed on screen: 'PCSync has
00 (28/10/2008)
BSM4
6
Publicité
