DISCOVER P02S Mode D'emploi page 13

- Connect the appliance to an electrical supply providing a
current whose specifications (voltage, frequency, etc.) are
identical to those indicated on the appliance's rating label.
Check that the voltage of your electrical installation corre-
sponds to that of the appliance before connecting it and re-
charging it.
- If the power cable is damaged, it must be replaced by the
manufacturer, its after-sales service or persons of similar
qualification in order to avoid a hazard.
- Never unplug or move the appliance by pulling on the pow-
er cable. Turn off and unplug the appliance before moving it.
Carry the appliance in its original packaging.
- Regularly and rigorously inspect the appliance and do not
use it if it is damaged or if you see any deterioration or mal-
function. Do not use it if it dropped, or if it has been dam-
aged in any other way. In this case, contact an authorized
repair center or qualified person to make the service and
reparation of the appliance.
- In the event of abnormal noise, smell or smoke, immedi-
ately stop the appliance and call an authorized repairer.
- Do not use water or detergent to clean the appliance. A dry
cloth will be preferable. Before cleaning, be sure to switch
off the power supply and turn off the appliance.
- This appliance is intended for use in an area with good air
circulation, and should not be used in a closed room without
air circulation.
- Do not immerse the appliance or power cable in water or
any other liquid.
11