Télécharger Imprimer la page

Publicité

Liens rapides

Gebrauchsanweisung ML-5-SPOT
Manual / Notice d'utilisation
ML-5-SPOT ist eine hochwertige 24V-DC LED-Punktbeleuchtung für anspruchsvolle industrielle Anwendungen und ist für den
gewerblichen Einsatz konzipiert.
ML-5-SPOT is a high-grade 24V-DC LED-Spot-Illumination for sophisticated industrial applications. The Spot is developed for
commercial use.
ML-5-SPOT est un éclairage localisé LED de 24 V DC destiné à des applications industrielles exigeantes et à un usage professionnel.
Gebrauchen Sie die ML-5-SPOT nur in technisch einwandfreien Zustand und ohne Veränderungen daran vorzunehmen. Für
anderweitige Nutzung übernehmen wir weder Garantie noch Haftung. Der Leuchtenkopf erwärmt sich um ca. 10K über
Umgebungstemperatur. Den Leuchtenkopf deshalb nicht abdecken, da sonst die Kühlung der Leistungs-LED beeinträchtigt wird.
Elektrische Installation, Inbetriebnahme- und Wartungsarbeiten dürfen nur von einer ausgebildeten Fachkraft mit einschlägiger
Unfallverhütungs-Ausbildung unter Beachtung der gültigen Vorschriften durchgeführt werden.
Only use ML-5-SPOT in a faultless technical condition. In another case, we cannot support any guaranty or any liability. The head of
the spot is heating about 10K over ambient temperature. Don't cover the spot, because. Electric installations, placing devices into
operation and maintenance tasks may only be carried out by qualified electricians with relevant training in accident prevention and
while adhering to applicable regulations.
Utilisez le ML-5-SPOT uniquement s'il est en parfait état et s'il n'a subi aucune modification. Nous n'accordons aucune garantie et
nous n'assurons aucune responsabilité dans le cas d'une utilisation autre que celle prévue. La tête de la lampe chauffe à environ 10
K au-dessus de la température ambiante. C'est pourquoi, il ne faut pas recouvrir la tête de la lampe sinon la LED ne pourra plus se
refroidir. L'installation électrique et les opérations de mise en service et d'entretien doivent impérativement être effectuées par du
personnel spécialisé formé en matière de prévention des accidents et respectant les réglementations applicables.
Abmessungen /
Dimensions
R26.4
Sicherheitshinweise / Safety notes/ Consignes de sécurité
Die eingesetzten LED's erfüllen die Anforderungen nach der „Low Risk" Gruppe. Diese bezieht sich auf den sichtbaren Bereich und
einer Expositionzeit von 100 Sekunden. Unter realen Umständen für Expositionsdauer und Abstand geht von diesem Produkt keine
Augengefährdung aus. Es muss jedoch hingewiesen werden, dass intensive Lichtquellen durch Ihre Blendwirkung ein
Gefährdungspotential haben.
The LED's specified in this data sheet fall into the „low risk" group, relating to devices in the visible spectrum with an exposure time
of 100 seconds. Under real circumstances for exposure time and distance, it is assumed that no endangerment to the eye exists from
this device. It should be mentioned, that intense light scources have a risk potential due to their blending effect.
Les LED utilisées répondent aux spécifications du groupe „Low Risk". Celui-ci concerne la partie visible et un temps d'exposition de
100 secondes. Dans des conditions réelles de durée d'exposition et de distance, ce produit ne présente pas de danger pour les yeux.
Il faut toutefois signaler que les sources lumineuses intenses peuvent présenter des dangers par éblouissement.
Schrempp electronic GmbH - Wiesenstrasse 5 - D-65843 Sulzbach/Ts. - www.schrempp-electronic.de
Tel.: (+49) 06196 / 802399-0 - Fax: (+49) 06196 / 802399-9 - E-Mail: main@schrempp-electronic.de
115
Rev.1 / November 2019
46.4

Publicité

loading

Sommaire des Matières pour Schrempp electronic ML-5-SPOT

  • Page 1 Unfallverhütungs-Ausbildung unter Beachtung der gültigen Vorschriften durchgeführt werden. Only use ML-5-SPOT in a faultless technical condition. In another case, we cannot support any guaranty or any liability. The head of the spot is heating about 10K over ambient temperature. Don’t cover the spot, because. Electric installations, placing devices into operation and maintenance tasks may only be carried out by qualified electricians with relevant training in accident prevention and while adhering to applicable regulations.
  • Page 2 CE-Zeichen / CE-Mark / Marquage CE DIN EN 60598-1 Anschlußbelegung / Connection configuration / Affectation des branchements Schrempp electronic GmbH - Wiesenstrasse 5 - D-65843 Sulzbach/Ts. - www.schrempp-electronic.de Tel.: (+49) 06196 / 802399-0 - Fax: (+49) 06196 / 802399-9 - E-Mail: main@schrempp-electronic.de...