Cleaning And Storage - Dörr QL-3 Notice D'utilisation

07 | LIGHT HEADS
07.1 EXCHANGING THE LIGHT HEADS
Hold the light body (3) with one hand and slide the quick lock closure (5) down-
wards away from the light head– remove the light head.
Place the desired light head (10/11/12) onto the light head socket (6) and press down
the head until the quick lock closure (5) snaps in.
07.2 USAGE OF THE LIGHT HEADS
1. Zoom head (10)
Torch light with 250 Lumen maximum brightness
•
Range up to 150 meters
•
Zoom function allows to adjust the cone of light:
•
2. Bendable working light (11)
350 Lumen strong LED
•
Over 8 cm long LED stripe
•
2 articulated joints (11b)
•
Big cone of light
•
3. Flexible mini zoom head (12)
Powerful 180 Lumen LED dot
•
Gooseneck (12b) 40 cm long
•
Small size to light up areas difficult to reach
•
Zoom function allows to adjust the cone of light:
•
08 | MAGNET
Attach the magnetic battery compartment (1) of the light body (3) to every metallic
surface e.g. front lids of cars, construction site scaff olds to have both hands free.

09 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the head light. We re-
commend a soft, slightly damp microfiber cloth to clean the outer parts of the
device. Turn off the device and remove battery before cleaning. Store the device
in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of
children. Keep away from pets.
10