Advance acoustic EL-250 Mode D'emploi page 12

obtain the better sound.
It's really important to the loudspeakers EL250 and EL210 to have the bass drivers inside so
face to face. In some cases of reverberation room whose walls are far more than a metre of
loudspeakers, it's possible to reverse the loudspeakers position.
Test carefully on several CD.
The EL170 loudspeaker should not be used directly on the ground, but on a stand or on a shelf
without any vibration.
To use verticaly the EL170 loudspeaker ( as a central loudspeaker), please use the base joined
into the packaging.
Wiring system :
Please check if all the material is switched off before starting the connections.
To connect the loudspeakers, use a quality cable with polarity mark. You can identify the positive
side by a stripe at the end of the cable or another mark (ie : +).