Publicité
Les langues disponibles
Les langues disponibles
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• The device generates visible laser beams.
• The device corresponds to laser class 2 according to: EN 60825-1:2015-07
• Ensure that the laser beam is guided in such a way that no persons are in the
projection area and that the reflected beam does not reach the occupied zone of
persons.
• Do not look into the laser beam and do not point it at persons or animals. Laser
radiation can cause injuries to the eye.
• If a laser beam hits the eye, close the eye consciously and move the head out
of the beam immediately.
• Do not aim the laser beam at reflective surfaces.
Installation
1.
Open the battery compartment and insert an AAA battery, as shown in the
battery compartment, and close it.
2.
Switch on the laser presenter.
3.
Insert the USB dongle in a free USB Type-A female of your computer.
4.
Now the USB dongle connects to the laser presenter automatically.
5.
Now you can use the laser presenter.
6.
During transport the USB dongle can be placed inside a compartment at the
bottom of the laser presenter.
Functions:
Press the laser button to activate the laser.
Keep the button pressed, to present the PowerPoint presentation in a
full screen mode. Keep the button pressed again, to close the full screen
mode. Short click to display the next page.
Keep the button pressed, to blank out the presentation. A black screen will
appear. Short click to display the previous page.
Short click to choose a Hyperlink. Keep the button pressed, to switch
Tab
between different Windows windows.
Enter
Short click to open a Hyperlink. Keep the button pressed, to close an open
Windows window.
-3-
Publicité
