Intended Use; Delivery Content - BASETech 814677 Mode D'emploi

3. Intended Use

Using this multi-talented device and its comprehensive range of accessories you can drill, polish
and grind. It is equipped with a collet chuck for the most diverse of tools. In addition, this handy
electrical power tool is equipped with a flexible shaft, making it easier to work on hard-to-access
spots.
To quickly and easily change the tool, the boring bar can be locked into position with the press
of a button. The collet chucks are made of corrosion-resistant brass to guarantee perfect tool
fitting. The speed regulator allows for material-specific treatment of the most diverse of workpieces.
Contact with moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery Content

• Mini drill unit
• Flexible shaft
• Complete set of tools and accessories
• Operating instructions
Up-to-Date Operating Instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
16