Placement Precautions; Before Use - Teac UD-301 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V CAUTION
Placement of the unit
o Avoid placing it in high temperature environ-
ments such as in direct sunlight or close to a
source of heat. Moreover, do not place the unit
on an amplifier or any other device that gener-
ates heat. Doing so could cause discoloration,
deformation or malfunction.
V Placement precautions
o Do not put anything on top of the unit.
o Avoid placing the unit in direct sunlight or close
to any source of heat, such as a radiator, heater,
open fireplace or amplifier. Moreover, avoid loca-
tions that are subject to vibrations or exposed to
excessive dust, cold or moisture.
o Place the unit in a stable location near the audio
system that you will use with it.
o Do not move the unit during use.
o The voltage supplied to the unit should match
the voltage printed on the rear panel. If you are in
any doubt regarding this matter, consult an
electrician.
o Since the unit could become warm during opera-
tion, always leave sufficient space around it for
ventilation. When placing this unit, position it so
that it is at least 5 cm (2") from walls and other
devices in order to allow good heat dissipation.
When installing it in a rack, leave at least 5 cm (2")
open above the unit and 10 cm (4") open behind
it.
o Do not open the body of the unit because this
could result in damage to the circuitry or cause
electric shock. If a foreign object should enter the
unit, contact your dealer.
o When removing the power plug from the wall
outlet, always pull directly on the plug; never
yank on the cord.
o If a TV is turned on while the unit is on, static
might appear on the TV screen depending on the
characteristics of the TV broadcast signal. This is
neither a malfunction of the unit nor of the TV. If
this occurs, put the unit in standby.

Before use

Maintenance
If the surface of the unit becomes dirty, wipe it with a
soft cloth or use diluted mild liquid soap. Do not use
thinner or alcohol because they could damage the
surface of the unit.
V For safety, disconnect the power cord from
the outlet before cleaning.
7

Publicité

Table des Matières
loading

Table des Matières