Operation; Start The Electric Pruning Shear - benza LIP25 Mode D'emploi

ENGLISH

3. OPERATION

• Start the electric pruning shear

Step 1: Plug the power line to the battery group (Figure 6).
Step 2: Fix the electron holder and battery holder, then put into the straps (Figure 7).
Step 3: Put on straps group
3.1. Tie up the straps of the battery holder
3.2. Adjust the straps of the battery holder to measure.
3.3. Attach the arm band.
3.4. Slip the connection cord of the pruner through the arm band.
3-5. The power line across the armlet (Figure 8);
Step 4: Plug the power line into the power terminal of the pruning shears (Figure 9)
Step 5: Turn on the power switch, and the light indicator will go red (Figure 10)
Step 6: Start the electric pruning shears
6.1. Pull the switch trigger and the cutter will close.
6.2. Release the switch trigger and the cutter will open.
Figure 6
Figure 10
Figure 7 Figure 8
Figure 11 Figure 12
Figure 9
4